NAM_DIAG - Default
By default, the following variables are written in the output file created by the DIAG program:
Name |
Meaning [Unit] |
Dimension |
|---|---|---|
ZS |
orography [m] |
2D |
ZSMT |
smoothed orography for SLEVE vertical coordinate [m] |
2D |
RHODREF |
dry density for reference state with orography [\(kg/m^3\)] |
3D |
THVREF |
\(\theta_v\) for reference state with orography [K] |
3D |
RHOREFZ |
\(\rho_d(z)\) for reference state without orography [\(kg/m^3\)] |
1D |
THVREFZ |
\(\theta_v(z)\) for reference state with orography [K] |
1D |
EXNTOP |
exner function at model top [-] |
|
SVPPn |
passive pollutant n concentration only if |
3D |
Surface variables by default only if CSURF='EXTE' in YINIFILE.des:
Name |
Meaning [Unit] |
Dimension |
|---|---|---|
UM10, VM10 |
zonal and meridional wind at 10 m height AGL [m/s] |
2D |
FF10MAX |
wind gusts at 10 m height AGL, with TKE component taken at first mass level \(4\sqrt{TKE_{IKB}}\) (only if CTURB=’TKEL’) [m/s] |
2D |
FF10MAX2 |
wind gusts at 10 m height AGL, with TKE component taken at 10m \(4\sqrt{TKE_{10m}}\) (only if CTURB=’TKEL’) [m/s] |
2D |
FF10MAX_AROME |
wind gusts at 10 m height AGL, with TKE component taken at 20m \(3.8\sqrt{TKE_{20m}}\) as in AROME-France (only if CTURB=’TKEL’) |
2D |
SFCO2 |
\(CO_2\) flux if present in YINIFILE [mg/m²/s] |
2D |